How to get Gross Beat effects in Logic Pro
Gross Beat only runs inside FL Studio, and there's no AU version for Logic Pro. Logic has its own tools for most of what Gross Beat does, spread over Remix FX, Step FX and region fades. Below is how to get each effect with those, and with simpleStutter, the free AU plugin I make that works the way Gross Beat does. The clips are a loop run through simpleStutter's engine, and I checked the other plugins' pages on 19 November 2026.
By Aiden Shihadeh, developer of simpleStutter · Published
Quick answer
| Effect | Built into Logic | With simpleStutter (free AU) |
|---|---|---|
| Half time | Flex Time on the region; Varispeed for the whole project | Half time block, tape-style or with the pitch kept |
| Stutters and repeats | Remix FX Repeater, played live | Repeat blocks from 1/2 to 1/64, with triplets and dotted notes |
| Tape stop | Slow Down fade on an audio region; Remix FX Tape Stop | Tape stop and spin-up blocks |
| Reverse | Remix FX Reverse | Reverse block on any steps |
| Trance gate | Step FX, Tremolo, or Remix FX Gater | Volume lane that plays over the time blocks |
| Switch patterns as it plays | No | Slots picked by MIDI notes or automation |
simpleStutter is a free AU for Logic Pro and GarageBand, on Apple silicon and Intel Macs. Download free
What the effects sound like
A 120 BPM house loop dry, then with three patterns: a 1/8 beat repeat that rolls out into 1/32, a tape stop that spins back up within the bar, and a 1/8 repeat with a 1/16 gate over it.
Set up simpleStutter in Logic
- Download the macOS installer from simpleStutter's page and run it. It installs the AU, which Logic uses, and a VST3 for other DAWs.
- Open Logic Pro. It checks new Audio Units when it starts. If simpleStutter doesn't show up, open Logic Pro → Settings → Plug-in Manager, find it under simpleSoundbank and make sure it's ticked.
- On an audio track, a software instrument track or a bus, click an empty Audio FX slot and choose Audio Units → simpleSoundbank → simpleStutter.
- Press play. simpleStutter follows Logic's tempo and bar position, so nothing happens while the transport is stopped, and a 1-bar pattern starts on every bar line.
Where a pattern has no blocks, the track plays through untouched, 32 samples late, and simpleStutter tells Logic about the delay so the track stays in time. The same AU loads in GarageBand.
Each Gross Beat effect in Logic
Half time
In Logic: Varispeed slows the whole project, down to 50%, so it's no good for one part. For a single audio track, turn on Flex Time and stretch the region to twice its length. That changes the region itself, and a software instrument part needs bouncing to audio first.
With simpleStutter: draw a Speed block over the steps you want, or load the Half time pattern. With Keep pitch off it plays like slowed tape; turn Keep pitch on for vocals and chords. It works on software instrument tracks and buses too, with no bouncing.
Stutters and beat repeats
In Logic: Remix FX has a Repeater set to note values. You hold it on with the XY pads or buttons while the track plays, and Logic records your moves as automation. There's no step grid, so each stutter is a move you play or draw.
With simpleStutter: draw Repeat blocks on the steps where you want them. Each block has its own size, so a fill can speed up from 1/16 to 1/32 to 1/64 across beat 4, and a block can be set to play only every 4 or 8 bars.
Tape stops
In Logic: drag a fade-out onto the end of an audio region with the Fade tool, then set the fade's type to Slow Down in the Region inspector. The region slows to a stop over the length of the fade, and a fade-in set to Speed Up spins it back. For a whole track or the mix, Remix FX has a Tape Stop button that slows the sound while you hold it.
With simpleStutter: pick the Tape stop tool, choose Stop or Spin up, and a shape: Turntable, Tape or Brake. It works on any track, and the music comes back on the next bar line. The free simpleTapeStop does stops on their own, with a Stop button you can automate.
Reverses
In Logic: Remix FX's Reverse plays the sound backwards while you hold it. For a fixed reverse on a region, use Reverse in the Audio File Editor's Functions menu, which changes the file, so work on a copy.
With simpleStutter: a Reverse block plays the audio backwards for as long as it lasts, at normal, half or double speed. Pair it with a fade-in in the Volume lane for a reverse swell into the downbeat.
Trance gates and pumps
In Logic: Step FX, in Logic since 10.4, has three step sequencers with up to 128 steps, and one can drive a gate for trance-style chops. Tremolo synced to the tempo gives a simpler gate, and Remix FX has a Gater you play live. For a sidechain pump, use the Compressor with the kick track as its side chain.
With simpleStutter: volume shapes go in their own lane under the time blocks, so a trance gate or a pump can play over a half time or a repeat in the same pattern. Logic's tools can do each part, but not layered in one place like that.
Switch patterns as the track plays
Gross Beat keeps patterns in slots and switches between them on MIDI notes. simpleStutter does the same with 12 slots on the notes C to B, in any octave. The free version has slots 1 and 2, and the unlock adds the rest. In Logic there are two ways to switch:
- MIDI notes: make a software instrument track with no instrument loaded and write the notes there. In simpleStutter's plugin window, open the Side Chain menu in the header and choose that track. Logic lists simpleStutter as a MIDI-controlled effect, which is why it can take notes.
- Automation: press A to show automation, pick simpleStutter's Pattern parameter on the track, and draw the slot you want at each point. In Latch or Touch mode, clicking a slot in the plugin writes the change.
A MIDI note overrides the Pattern parameter until the parameter moves again, so pick one way per track.
Other Gross Beat-style options on a Mac
- SCRAMBLE is a free vocal effects plugin by Jordon Lumley whose effect modes include half time, reverse, tape stop, chop and pump. It's AU and VST3 on a Mac. Get it from scrambleplugin.com.
- Glitch 2 by illformed is free as an AU and paints retriggers, reverses, tape stops and gates on a step sequencer. It's more of a glitch tool, with no separate volume lane. Get it from illformed.
- Cableguys ShaperBox 3 is paid, about €99, and its TimeShaper module draws time curves much like Gross Beat.
- FL Studio for Mac runs Gross Beat, and it's included from the Signature Bundle up. That means making the track in FL Studio, though.
I've compared all of these, and what each can't do, in free Gross Beat alternatives.
Common questions
Can you use Gross Beat in Logic Pro?
No. Gross Beat has no AU version, and Image-Line sells it for FL Studio only. On a Mac you'd need to make the track in FL Studio, or use a plugin that works the same way in Logic.
Is there a free Gross Beat for Mac?
There's no free version of Gross Beat. The free AU plugins that work most like it in Logic and GarageBand are simpleStutter, which I make, and Glitch 2. SCRAMBLE covers half time and tape stops inside a vocal effects plugin.
How do I make half time in Logic Pro?
Varispeed slows the whole project, so for one track either stretch the region to twice its length with Flex Time, or put a half-time plugin on the track. simpleStutter's Half time block plays it like tape or with the pitch kept.
How do I do a tape stop in Logic Pro?
Drag a fade-out onto the end of an audio region and set its type to Slow Down in the Region inspector, or hold Tape Stop in Remix FX. For software instrument tracks, use a plugin such as simpleTapeStop or simpleStutter.
Does simpleStutter work in GarageBand?
Yes, the AU loads in GarageBand on a Mac as an effect on a track. It runs natively on Apple silicon and Intel Macs with macOS 11 or later.