How to get Gross Beat effects in Ableton Live
Gross Beat is an FL Studio plugin, so Ableton Live can't load it. You can still get each of its effects in Live: half time, beat repeats, tape stops, reverses and trance gates. Below is how to do each one with Live's own devices, and with simpleStutter, the free plugin I make that works the way Gross Beat does. The clips are a loop run through simpleStutter's engine, and I checked the other plugins' pages on 19 November 2026.
By Aiden Shihadeh, developer of simpleStutter · Published
Quick answer
| Effect | Built into Live | With simpleStutter (free) |
|---|---|---|
| Half time | Warp the clip and press ×2 | Half time block, tape-style or with the pitch kept |
| Stutters and repeats | Beat Repeat | Repeat blocks from 1/2 to 1/64, with triplets and dotted notes |
| Tape stop | No device; Re-Pitch warping and tempo automation | Tape stop and spin-up blocks |
| Reverse | Rev button on the clip | Reverse block on any steps |
| Trance gate | Auto Pan-Tremolo in Tremolo mode | Volume lane that plays over the time blocks |
| Switch patterns as it plays | No | Slots picked by MIDI notes or automation |
simpleStutter is free for Ableton Live on Mac and Windows: VST3, and AU on a Mac. Download free
What the effects sound like
A 120 BPM house loop dry, then with three patterns: a bar of tape-style half time, a 1/16 repeat on beat 3 that runs into a tape stop on beat 4, and half time with a trance gate over it.
Set up simpleStutter in Live
- Download the macOS or Windows installer from simpleStutter's page and run it. On a Mac it installs the AU and the VST3, and on Windows the VST3.
- Open Live's settings: Live → Settings on a Mac, or Options → Settings on Windows. On the Plug-Ins tab, turn on Use VST3 Plug-In System Folders, or Use Audio Units on a Mac, then click Rescan.
- In the browser, click Plug-Ins, open simpleSoundbank and drag simpleStutter onto an audio track, a group track or the Main track.
- Press play. simpleStutter follows Live's tempo and bar position, so nothing happens while the transport is stopped, and a 1-bar pattern starts on every bar line.
Where a pattern has no blocks, the track plays through untouched, 32 samples late, and simpleStutter tells Live about the delay so the track stays in time with the rest of the set.
Each Gross Beat effect in Live
Half time
In Live: select an audio clip with Warp on and press the ×2 button under its BPM. Live now treats the clip as twice its tempo, so it plays at half speed. In Re-Pitch warp mode it drops an octave like tape, and in Complex Pro it keeps its pitch. The clip doubles in length, so cut it back to the bars you want. This only works on audio clips, so bounce a MIDI part to audio first.
With simpleStutter: draw a Speed block over the steps you want, or load the Half time pattern. With Keep pitch off it plays like slowed tape; turn Keep pitch on for vocals and chords. It works on any track, including a MIDI instrument or a whole group, and you can turn it off again on the next bar.
Stutters and beat repeats
In Live: Beat Repeat captures a slice and repeats it. Set Grid to 1/16, Gate to the number of 16ths it should last, and Mix to Insert so the dry sound mutes while it repeats. Interval and Offset decide where in the bar it grabs the slice, and Chance makes it happen only some of the time. To have it play only at the end of a phrase, automate the device's on switch.
With simpleStutter: draw Repeat blocks on the steps where you want them. Each block has its own size, so a fill can speed up from 1/16 to 1/32 to 1/64 across beat 4, and a block can be set to play only every 4 or 8 bars.
Tape stops
In Live: Live has no tape stop device. The usual workaround is to set the clip's warp mode to Re-Pitch and automate the song tempo down at the end of the phrase. That slows the whole set, so record the result to a new audio track and put the tempo back. I've covered that and a warp marker method in how to do a tape stop in Ableton.
With simpleStutter: pick the Tape stop tool, choose Stop or Spin up, and a shape: Turntable, Tape or Brake. A stop on the last beat of the bar slows to silence and the music comes back on the next bar line, with nothing to undo. The free simpleTapeStop does stops on their own if that's all you need.
Reverses
In Live: select an audio clip and click Rev in Clip View. Live writes a reversed copy of the file and plays that. For one beat, split the clip first and reverse only the piece you want.
With simpleStutter: a Reverse block plays the audio backwards for as long as it lasts, at normal, half or double speed. Pair it with a fade-in in the Volume lane for a reverse swell into the downbeat.
Trance gates and pumps
In Live: Live 12.3 renamed Auto Pan to Auto Pan-Tremolo. Switch it to Tremolo mode, sync the rate to 1/16 and turn up Shape so the wave is close to square, and it chops the sound in time. In earlier versions, Auto Pan with Phase at 0° does the same. For a sidechain-style pump, use Compressor with the kick as its sidechain input.
With simpleStutter: volume shapes go in their own lane under the time blocks, so a trance gate or a pump can play over a half time or a repeat. This layering is the part of Gross Beat I find hardest to copy with Live's devices, because Beat Repeat and the warp tricks don't gate what they play.
Switch patterns as the track plays
Gross Beat keeps patterns in slots and switches between them on MIDI notes. simpleStutter does the same with 12 slots on the notes C to B, in any octave. The free version has slots 1 and 2, and the unlock adds the rest. In Live there are two ways to switch:
- MIDI notes: make a MIDI track, set its MIDI To menu to the audio track simpleStutter is on, then pick simpleStutter in the menu under it. Write notes in a clip on that MIDI track. Live only sends the notes while the MIDI track is armed or its clip is playing.
- Automation: in Arrangement View, pick simpleStutter and its Pattern parameter in the track's automation menu, and draw the slot you want at each point in the song. Clicking a slot in the plugin while Live records automation writes the change too.
A MIDI note overrides the Pattern parameter until the parameter moves again, so pick one way per track.
Other Gross Beat-style options for Live
- Gross Warp by ELXR is a Max for Live device that draws time and volume envelopes like Gross Beat, with 8 patterns per device. It's $15 and needs Max for Live, which comes with Live Suite. Get it from ELXR.
- SCRAMBLE is a free vocal effects plugin by Jordon Lumley whose effect modes include half time, reverse, tape stop, chop and pump. It's VST3 and AU on a Mac and VST3 on Windows. Get it from scrambleplugin.com.
- Glitch 2 by illformed is free and paints retriggers, reverses, tape stops and gates on a step sequencer. It's more of a glitch tool, with no separate volume lane. Get it from illformed.
- Cableguys ShaperBox 3 is paid, about €99, and its TimeShaper module draws time curves much like Gross Beat.
I've compared all of these, and what each can't do, in free Gross Beat alternatives.
Common questions
Can you use Gross Beat in Ableton Live?
Not directly. Image-Line sells Gross Beat for FL Studio only. If you own FL Studio you can load it as a plugin inside Live, but routing a Live track through Gross Beat that way is fiddly, so I'd use a plugin that loads in Live itself.
Is there a free Gross Beat for Ableton?
There's no free version of Gross Beat. The free plugins that work most like it in Live are simpleStutter, which I make, and Glitch 2. Gross Warp is a $15 Max for Live device built to work like it.
How do I make half time in Ableton?
Turn on Warp for an audio clip and press the ×2 button under its BPM, so it plays at half speed. Re-Pitch drops the pitch an octave like tape, and Complex Pro keeps the pitch. A half-time plugin does the same on any track without editing the clip.
How do I do a tape stop in Ableton?
Live has no tape stop device. Set the clip to Re-Pitch and automate the song tempo down, then record the result to a new track, or put a tape stop plugin on the track. The steps are in how to do a tape stop in Ableton.
Does simpleStutter work in every edition of Live?
It loads in any edition that loads plug-ins, including Lite, Intro, Standard and Suite: VST3 on Windows and Mac, and AU on a Mac. It runs natively on Apple silicon and Intel Macs with macOS 11 or later, and on 64-bit Windows 10 and 11.